PLC Programming for Professionals (Allen Bradley)

PLC Course for professionals

Hello everyone!

What you’ll learn

  • By the end of this course, you will be able to create a PLC program from scratch..
  • Be able to completely setup basic Rockwell Automation in RSLogix 500 from scratch, understanding PLC programming(Ladder Logic)..
  • This Course will help you to Understand every Concept deeply by the experiments..
  • This Course will help you to test the program on simulator, although we will teach you on Both (Simulator or on Real PLC)).

Course Content

  • Get Your Softwares –> 3 lectures • 21min.
  • Communication between PLC & PC –> 1 lecture • 8min.
  • Basic Gates – Ladder Logic –> 4 lectures • 30min.
  • PLC System Overview –> 2 lectures • 16min.
  • Concept of Latching –> 2 lectures • 11min.
  • Programming Timers –> 10 lectures • 1hr 21min.

PLC Programming for Professionals (Allen Bradley)


Hello everyone!

This is the course on Plc programming on RSLogix 500, Which is the software Used to Program Allen Bradley PLC. This software is available for free on the Rockwell Automation website, within the course we will also guide you on how you can download and install this software.  We will discuss every concept in detail.

This course is on Allen Bradley but after watching this course you got a very good idea of plc programming and you are able to program other plc also because the programming concept is the same.

Software and Hardware requirements

We are using RSLogix 500 software, which is freely available on the Rockwell Automation website. We will tell you how you can download this software.

You do not need any hardware other than the laptop to learn Plc programming, you can practice. Although to show you the communication between the Plc and Pc we are using MicroLogix 1100.

Topic covered

PLC system overview ( Covered)

PLC Communication with Plc & Software (Covered)

Basic Gates Ladder Logic (Covered)

Concept of Latching (Covered)

Programming Timers (Covered)

Programming Counter ( Uploaded next week)

Move Instruction ( Uploaded Next week)

Compare Instruction ( Uploaded Next week)

Program control Instruction. ( Uploaded Next week)

Note: 50% content of this course is uploaded and the remaining 50% we will add within 2 Weeks.



Get Tutorial